Hardface weld metal is primary carbide and eutectic structure,it offers high hardness and excellent abrasion resistence.
No more than two layers of repairing welding is preferred,it鈥檚 applicable in
Wear coal wheels and roller,
Cement mixer,
Cutting knife of mud...Contact Now
Hardfacing welding electrode HB-E10-UM-60G is a basic coated electrode that is highly resistant to abrasion wear caused by coarse hard minerals. It has a highly concentrated chromium carbide in its structureContact Now
Hardfacing welding electrode HB-E7-UM-200 s a basic coated electrode. It gives an austenitic Hadfield Manganese steel type weld metal with 13 % Mn content. 3 % Ni content increases the ductility and impact properties. Soft weld metal has a low resistance to abrasion after the...Contact Now
Hardfacing welding electrode HB-E6-UM-60 is a general purpose, rutile coated hardfacing electrode especially designed to use with small transformers having a relatively low open circuit voltage. It is resistant to softening up to 500掳C. It gives a high abrasion resistant...Contact Now
Hardfacing welding electrode HB-E5-UM-45 聽is a rutile coated electrode. It gives a corrosion and wear resistant ferritic-martensitic stainless steel weld metal. It is used in hardfacing applications where a hardness of 42-46 HRC is required. The weld metal is resistant to...Contact Now
Hardfacing welding electrode HB-E4-UM-60 is a basic coated electrode. It gives a Mo alloyed, high speed steel type weld metal. Deposited metal retains its toughness properties at high temperatures enabling the formation of high strength welds, particularly during the...Contact Now
Hardfacing welding electrode HB-E2-UM-60 is a basic coated electrode. It gives a high oxidation resistant (up to 850掳C) weld metal that also have a high wear resistance. It is resistant to wears of medium abrasions at high temperatures.Contact Now
Hardfacing welding electrode HB-E1-UM-350 is a heavily coated basic electrode particularly used for wear conditions where impact stresses are considered. It gives a weld metal that is resistant to deformations of high rolling forces including metal-to-metal friction. Weld...Contact Now
Welding flux are for welding of ordinary carbon manganese, low alloy structures and boiler quality steel in combination with appropriate SAW wire (such as EL12, EM12K).Contact Now
鲁公网安备37020302372420
